The unusual one. How often do you see a 3 way standmount speaker these days that isn’t modelled on a studio monitor? Using that amazing in-house made paper cone midrange and scintillating silk dome tweeter, the Magic adds our own unique bass driver.
Flat faced, and made from carefully selected balsa, our (again) in house designed and made bass driver has our signature natural feel and is direct connected to the amplifier with no other components in between. It rolls off naturally into the mid range driver as if they are one unit, and gives that solid bass foundation that the framework of your favourite music can build upon.
The Magic combines the wonderful imaging of a standmount speaker with that wonderful gravitas only a dedicated bass driver can give. The best of both worlds!
Finishing colour: Black / Brown / high-gloss piano finish. All others colours on request and special order.
|Acoustic accomplishment:||Wooden bass reflex port on the back panel.|
|Finishing:||Piano lacquer finish.|
|External dimensions, mm:||500 x 200 x 320|
|Acoustic transducers :||1. Contrast 1' Silk dome tweeter.
2. Contrast 5.5' inch. paper cone mid range.
3. Contrast 5.5' inch. balsa wood flat cone low range.
|Connection interface:||Spades and bananas, single-wire|
|Nominal impedance, Ohm.
|Power handling, Watt:||100|
|Frequency range, Hz:||36 – 20.000|
|Crossover filtering:||The most minimal electronic crossover filtering network. Only two capacitors in crossover circuit.
|Frequency response of tweeter (Frequency cut), Hz:||10.000|
|Recommended amplifier impedance (Ohm.):||4 / 8 / 16|
|Weight (pair), Kg:||40.0|